wear resistant materials under erosion wear condition
Summary:The choice of wear resistant material is related to the erosion angle in the condition of gas and solid two - phase flow erosion wear.
The choice of wear resistant material is related to the erosion angle in the condition of gas and solid two - phase flow erosion wear. In the small erosion angle, ceramic materials are the most suitable in order to increase hardness. But when there is a big erosion angle, high hardness metal wear resistant steel plate or rubber material is appropriate to improve the toughness of the material or deformation capacity.
Erosion wear of several materials at different temperatures
| Materials | 20 DEG | 110 DEG | 200 DEG | 300 DEG | 500 DEG | 1000 DEG | 1500 DEG |
| Ceramic coatings | 0.11 | 0.09 | 0.10 | 0.10 | 0.14 | 0.27 | 0.25 |
| 16 Mn Steel | 1.21 | 1.32 | 1.42 | 1.57 | 3.6 | 7.9 | 10.9 |
| 65 Mn Steel | 1.08 | 1.19 | 1.23 | 1.46 | 3.2 | peel off | peel off |
| Refractory cast material | 5.9 | 3.3 | 2.9 | 4.7 | peel off | peel off | peel off |
| Ceramic Tiles | 0.07 | 0.15 | 6.3 | peel off | peel off | peel off | peel off |
Download the attachment:www.wearresistantplatesteel.com (Has been downloaded 0 times)
Category
Search
