Wear and abrasion resistant steel plate welding process description

1.Clean the welding parts
Remove dust, oil and rust, you need to use air-arc cutting to remove the original welding layer if necessary
2.Make welding process
In Zhangjiagang YaoYu, we have different flux-cored welding wire for your reference according to your applications, such as Vautid 100, Vautid 100Mo,Vautid 143, Vautid 145, etc.
3.Install and adjust the welding equipment and tooling
Send your flux-cored welding wire to wire feeding machine,and check water-cooling welding torch and other equipment needed for welding, then steel parts have to be fixed on the equipment(such as chuck, roller frame),and do welding according to the corresponding parameters.
4.Do welding 
We need to check the wear parts quality during welding process
5.Ground welding surface
Ground wear resistant steel plate surface after welding, test HRC hardness
6.Make wear resistant plate flat using rolling machine, flatness is about +/-1mm
7.Cutting plate as order, painting and packing

Technical need to make welding risk analysis and have corresponding measures, strictly follow the operation method and process parameters, and test abrasion resistant steel plate according to the quality inspection method before and after welding.